USB Explorer 200

UWB Generator 320

USB Explorer 260

WUSB Explorer 300

 

USB Explorer 200 - Features

The USB Explorer 200 is a non-intrusive high speed USB 2.0 protocol analyzer that enables you to display bus states, packets sent and decode descriptors of the USB protocol. It can detect errors in devices, host controllers, embedded softwares or drivers as well as measure their performance. Very simple to use, this USB analyzer is the ideal companion for anyone developing USB devices, hosts, embedded software or drivers.

Available in two disctinctive versions, the USB Explorer 200 will be matching perfectly your own development needs. The Standard Edition contains essential functionalities for every USB developer. The Professional Edition adds a hardware trigger, extensive USB classes decoders, a versatile data export functionality as well as a USB Analysis Development Kit enabling one to develop custom USB analysis software.

Software

• Efficiently decodes all standard requests and data structures
• Automatically deciphers encrypted data payload
• Highlights protocol errors or misuse
• Groups similar packets and hide redundant fields to reduce information burden
• Free viewer software to exchange recorded traffic with others
• Free lifetime software maintenance

enlarge

Hardware

• Compatible with all three USB 2.0 speeds
• Automatic detection of the Link Under Test speed
• Measurement of USB bus states and low level protocols
• Highly affordable permitting to supply each developer with one unit
• Non intrusive analysis
• Powerful hardware trigger
• High level decoding of classes requests and descriptors (Mass Storage, etc.)

 

USB Explorer 200 - Datasheet

Specifications

Enclosure
 •  Width: 150 mm (5.91 inches)
 •  Length: 120 mm (4.72 inches)
 •  Height: 65 mm (2.56 inches)
 •  Weight: 750 g (1.7 pounds)

Analysis Computer connector
 • USB 2.0 high speed (480 Mbit/s)

Link Under Test connectors

 •  USB 2.0 high speed (480 Mbit/s), full speed (12 Mbit/s) and low speed (1.5 Mbit/s)
 •  Automatic speed discovery of Device Under Test

Trigger connector

 •  Type: BNC
 •  Input: 5V max, 1Mohms
 •  Output: 3.3V, max 20mA
 •  Absolute maximum ratings: -0.5V .. +6.5V, 50mA

Indicators

 •  Power: illuminated when the analyzer in powered on
 •  Activity: illuminated in green when packets are detected (in red when they are recorded)
 •  Trigger: illuminated in green when a trigger is detected on input (in red when detected in output)

Memory

 •  32 MBytes of FIFO memory
 •  Analyzed data is transmitted continuously

Bus analysis

 •  Timestamp: 16.67 ns (60 MHz) precision
 •  Low-level errors: detection of bit-stuffing, CRC5 and CRC16 errors
 •  Bus states: detection and measurement of Reset, Suspend, Keep Alive and High Speed Handshake states

Power Requirements

 •  Powered by the USB bus of the Analysis computer
 •  No external power supply needed

Hardware update

 •  The decoding engine and firmware are automatically updated with each software release

Product Warranty

 •  Two years limited warranty

Ps: Ellisys reserves the right to change the features and specifications of the product without notice.

Highlights

 •  Compatible with all three USB 2.0 speeds
 •  Automatic detection of the Link Under Test speed
 •  Measurement of USB bus states and low level protocols
 •  Highly affordable permitting to supply each developer with one unit
 •  Non intrusive analysis
 •  Small and robust enclosure, powered by the USB bus
 •  Perfect for off-site interventions
 •  Download of the analyzed data in real time with a high speed USB 2.0 connection
 •  Scalable design of the hardware
 •  Powerful hardware trigger
 •  Display of transactions and transfers layers
 •  High level decoding of standard requests and descriptors
 •  High level decoding of classes requests and descriptors
 •  Powerful display filters
 •  Exportation of analyzed data to several formats (XML, text, raw, etc.)
 •  Didactic display with reference to the specification
 •  Software development kit available
 •  Free viewer software

Requirements

 •   Pentium III 600MHz
 •  128 MBytes RAM
 •  USB 2.0 EHCI host controller
 •  Resolution 800x600 256 colors
 •  WindowsR 2000 Service Pack 4, WindowsR XP Service Pack 1 or above
 •  Internet Explorer 5.0 or above

top