Test Fixtures /article

 Product Summary 

High-Speed Embedded Host Electrical Test Board is approved by USB-IF, specifically designed for the electrical test of USB embedded host products.

 Application 

It applies to USB 2.0 Embedded host products.

 Key Feature 

  • USB On-The-Go Compliance Plan for the USB 2.0 Specification Rev 1.2 Section 9.3Can cover USB Compliance test plans:
  • Embedded High-Speed Host Electrical Test Procedure Rev 1.01 Section 3
  • Support 10 pre-defined Test Mode PID value settings
  • On-board quick switch, no additional software and driver needed
  • USB Bus-Powered, no additional AC adapter needed
 Detail
 
 
 
 Product Summary 

Smart memory card and USB switch is specifically designed for USB and Memory Card devices testing and to meeting the requirements of product development and testing stages. The four Bi-Way USB Master/Slave ports and four Memory Card slots provide an efficient way to quickly connect with the DUT. Software featuring the switch function can help reduce testing time and prevent human error.

 Application 

It applies to USB and smart memory card devices.

 Key Feature 

USB Switch

  • Bi-way Master USB switch with 4 Slave USB
  • Simulate USB Hot-Plug (Fully stop signals when disable)
  • Simulate USB Charge/ Dis-Charge for Mobile Device
  • Software control for automation, able to work with Memory Switch simultaneously
  • Fully integration with TestQuest™ Testing Automation tools

Memory Card

  • One-way Master switch with 4 Slave Memory Slots
  • Simulate Hot-Plug actions
  • Support most popular card type
  • Software control for automation, able to work with USB Switch simultaneously
  • Fully integration with TestQuest™ Testing Automation Tools 
 Detail
 
 

  Product Summary 

USB Compliance Pre-test fixtures set are specifically designed for USB 2.0 Compliance test program. This set of seven pieces aim to verify the USB product to conform withto the USB 2.0 specification. It can also be used for the pre-test to verify the product to conform withto the USB 2.0 specification.

 Detail

 

 Application 

It applies to products that supports to USB 2.0 specifications.

The separate seven test fixtures:

Allion USB Back-Voltage Fixture

 Detail

 

Allion USB Droop Test Fixture

 Detail

 

Allion USB Drop Test Fixture

 Detail

 

Allion USB HS Host SQ Test Fixture

 Detail

 

Allion USB HS SensitivityTest Fixture

 Detail

 

Allion USB HS Device Electrical Test Fixture

 Detail

 

Allion USB Inrush Test Fixture

 Detail

 

 

If you wish to buy our products, please click Allion Online Shop,
or contact us directly: +886-2-7722-8800 or service@allion.com