2018 2018-04-10
The performance of IoT devices should involve in three factors: product capability, network connectivity and user environment/ behavior. Vendors thus need a new methodology to verify products before launching to the market. This article will discuss a new methodology of IoT device validation “Heat Map Analysis”, which is used to perceive real-world factors and further discover and resolve common wireless connectivity issues.
2018 2018-01-31
Since the communications of devices have been extended from “one-to-one” to “one-to-many,” product makers need whole new methodologies to validate the functionality, performance, and interoperability of their products.
2017 2017-09-29
Solid State Drive (SSD) has gradually become the focus for individuals who desire to enhance their storage equipment. Especially since 2016, more and more SSD vendors have applied the newly invented “3D NAND Flash” and “NVMe Communications Protocol” to their latest products. With the larger capacity, faster speed, and friendlier price, SSD will comprehensively replace Hard Disk Drive (HDD) in the near future.
2017 2017-09-01
Allion is pleased to announce development efforts for IoT interoperability testing. In our state-of-the art IoT facility, Allion performs wide range of test for interoperability between different OEM vendor smart devices.
2017 2017-02-03
Video Electronics Standard Association; VESA has released the DisplayPort High Bit Rate 3 ( or DisplayPort 1.4 ) early certification program in January 2017.
2017 2017-02-03
With the rapid development of the IT industry, transfer quality, speed and application diversity have initiated a continued drive towards the development of faster transfer speeds.
2017 2017-01-25
Many conceptual products shown in the past have become actual or even mass production products this year. Out of all the products exhibited “VR” related products has been the focus of attention, this can be seen in the 79% increase for related products.
2016 2016-12-29
Ever since the start of the program, Allion has worked closely with MCPC’s mobile device charging working group to set and plan the mobile device safety testing criteria and overall operation.