| Home | Service Inquiry | Contact Us | Career | Site Map |

 

DisplayPort Compliance Test Adapters

These sets of fixtures are designed according to the test criteria defined in the DisplayPort Compliance & Logo Program. Single Data Rate (SDR) DisplayPort v1.1 bandwidth is required to exceed 10.8Gbps, equivalent to a data transfer rate of 1080 Mbytes/second. This adapter test set will also support Double Data Rates (DDR) which is anticipated in the v2.0 release. Approved by VESA, it is suggested to be used for your DisplayPort product pre-certification.

• Compliant with DisplayPort v1.0/1.1 SDR and v2.0 DDR requirements
• v1.1 main link bandwidth of up to 10.8Gbps, equivalent to a data transfer rate of 1080 Mbytes/second
• Industry standard DisplayPort plug/receptacle

 

ET-DP-TPA-S
DisplayPort™ v1.1/v2.0 SDR/DDR Test Adapter Test Set

FEATURES

• 17.5 GHz test adapter bandwidth exceeds the v1.1 specification and will exceed the v2.0 specification when approved in 2007
• Insertion loss <-3 dB at 17.5 GHz
• Return loss <-20dB @ 10 GHz
  <-24 dB @ 4.05 GHz (SDR)
  <-20.2 dB @ 8.10 GHz (DDR)
• Trace differential impedance 100 +/- 5 ohms
• Calibration fixtures to zero out test fixture attributes
• (SOLT with 2x thru)
• Characterization of impedance, reflections, jitter, insertion & return loss, crosstalk, eye patterns, S-parameters, and S4P parameters
• Supports both active and passive cables

Standards & Compatibility

• DisplayPort v1.0 and v1.1
• Anticipated support for the Double Data Rate (DDR) specification v2.0 when approved in 2007

Click here for more product details.

How to buy?

Allion Online Shop  or nbd_sales@allion.com